產品介紹
Home > Product > High Speed Bus & Test Measurement > General Test Products > Digital Oscilloscope > ROHDE & SCHWARZ - HMO 3000 Series (Discontinue)
ROHDE & SCHWARZ - HMO 3000 Series (Discontinue)
    ROHDE & SCHWARZ
    Principal：ROHDE & SCHWARZ

    An excellent sampling rate in combination with a large memory depth is the key for precise signal analysis. Depending on the requirements HMO3000 users can choose between three 2(4)Ch. versions with bandwidths between 300 and 500 MHz.

    R&S®HMO3000 Series digital oscilloscope bandwidth is 300 MHz、400MHz and 500 MHz., 2 or 4 ch.
    The fanless instrument offers a sampling rate of 4 Gsample/s and a memory depth of 8 Msample.
     

    • 4Gsample/s sampling rate, low-noise flash A/D converter, 8 Msample memory depth

    • High vertical sensitivity down to 1 mV/div

    • High acquisition rate to identify signal faults

    • Mixed signal function as standard

    • Serial bus analysis: hardware-based triggering and decoding

    • FFT: the easy way to analyze the signal spectrum

    • 28 automeasurement parameters plus statistics formula editor, ratio

    • Six-digit hardware counter

    • Production Tester: Pass / Fail Mask testing

     

    Bandwidth (-3 dB)

    300 MHz, 400MHz, 500 MHz

    Analog channels

    2/4

    Digital channels
    (opt. HO3508)

    8/16

    Input sensitivity
    @ 1 M Ω

    1 mV to 10 V

    Sampling rate
    Per channel

    2 Gsample/s

    Interleaved

    4 Gsample/s

    Digital channels (opt.)

    1 Gsample/s

    Memory depth 
    Per channel

    4 Msample

    Interleaved

    8 Msample

    Digital channels (opt.)

    4 Msample

    Display

    6.5" LED-backlit TFT VGA Display

    Serial bus triggering 
    and decoding (opt.)

    I²C, SPI, UART/RS-232, CAN, LIN

     
    Back