產品介紹
Home > Product > High Speed Bus & Test Measurement > General Test Products > Digital Oscilloscope > ROHDE & SCHWARZ - HMO 1202 Series (Discontinue)
ROHDE & SCHWARZ - HMO 1202 Series (Discontinue)
    ROHDE & SCHWARZ
    Principal:ROHDE & SCHWARZ

    High sensitivity, multifunctionality and a great price – that is what makes the HMO1002 so special. From embedded developers to service technicians to educators – with its wide range of functions, the HMO1002 addresses a broad group of users.

    R&S®HMO1202 Series digital oscilloscope bandwidth is 100 MHz, 200 MHz and 300 MHz.
    The fanless instrument offers a sampling rate of 2 Gsample/s and a memory depth of 2 Msample.

    • 2 Gsample/s sampling rate, 2 Msample memory depth

    • High vertical sensitivity down to 1 mV/div

    • High acquisition rate to identify signal faults

    • Mixed signal function as standard

    • Serial bus analysis: hardware-based triggering and decoding

    • The right signal at hand: pattern generator up to 50 Mbit/s and function generator up to 50 kHz

    • Voltmeter measurements using an oscilloscope

    • Wide selection of automatic measurement functions

    • QuickView: key results at the push of a button

    • FFT: the easy way to analyze the signal spectrum

    •  Component Tester: 2 pole test of passive components and semiconductors

    •  Production Tester: Pass / Fail Mask testing

    •  31 automatic measurement functions, 13 cursor measurement functions

     

    Model:Bandwidth (-3 dB)

    HOM1212:100 MHz
    HOM1222:200 MHz
    HOM1232:300 MHz

    Analog channels

    2

    Digital channels
    (opt. HO3508)

    8

    Input sensitivity
    @ 1 M Ω

    1 mV to 10 V

    Sampling rate
    Per channel

    1 Gsample/s

    Interleaved

    2 Gsample/s

    Digital channels (opt.)

    1 Gsample/s

    Memory depth 
    Per channel

    1 Msample

    Interleaved

    2 Msample

    Digital channels (opt.)

    1 Msample

    Display

    6.5" TFT VGA Display

    Serial bus triggering 
    and decoding (opt.)

    I²C, SPI, UART/RS-232, CAN, LIN

     
    Back